Printers have a talent for failing just before an important meeting. The good news is that many office printing problems come down to a handful of common causes, and you can often sort them out yourself in a few minutes. Work through these checks in order, starting with the simplest.
Start with the basics
It’s worth ruling out the obvious before changing any settings:
- Read the printer’s own screen, as it will often tell you exactly what’s wrong
- Check for a paper jam, an empty tray, an open door or low toner
- Make sure the network cable or USB cable is firmly connected
- Find out whether the problem affects everyone or just one computer
- Turn the printer off, wait 30 seconds, turn it back on, then restart your computer
That fourth check is especially useful. If nobody can print, look at the printer or the network. If only one person is affected, the fault is probably on their computer.
When the printer shows as “offline”
Offline usually means your computer can’t reach the printer, even though the printer is switched on. Try these steps:
- Check its network connection. Look on the printer’s screen or print a network status page to confirm it’s connected and has an IP address.
- Check you’re on the right network. A laptop on the guest Wi-Fi, or connected to a VPN, may not be able to see the printer.
- Check you’re using the right printer. Windows can list the same device more than once, sometimes as “Copy 1”. In Windows 11, go to Settings, then Bluetooth & devices, then Printers & scanners.
- Remove and re-add it. If it still won’t connect, delete the printer from that list and add it again.
When jobs get stuck in the queue
One stuck document can block everything behind it. Open the print queue from Printers & scanners and cancel the job at the top. If it won’t clear, restart your computer, or restart the Print Spooler service from the Windows Services app. Then send a short test page before you reprint anything long.
When scanning stops working
Scan-to-email and scan-to-folder often work for years, then stop for no obvious reason. Common causes include:
- A password changed on the email account the printer uses to send scans
- Security changes at your email provider, as older printers may not support newer ways of signing in, including with Microsoft 365
- A changed password or moved location for the shared folder that receives scans
These usually need changes in the printer’s admin settings, so it’s a good point to involve whoever looks after your IT.
How to stop the same problems coming back
- Use a wired connection where you can. For a busy shared printer, an Ethernet cable is generally more reliable than Wi-Fi. If it has to use Wi-Fi, our guide to fixing slow office Wi-Fi may help.
- Give it a fixed IP address. Reserving an address in your router stops the printer changing address and “disappearing”.
- Install the right driver. Get drivers from the manufacturer’s website, not a third-party download site.
- Keep spare toner in stock. A spare set in the cupboard prevents a last-minute dash.
Don’t forget security
A network printer is a small computer, so it’s worth looking after it like one. Change the default admin password, install firmware updates from the manufacturer, and turn off features you don’t use. Many printers also store documents internally, so see our post on disposing of old equipment safely before you replace one.
Still not printing?
If the fault keeps returning, the cause may lie in your network or setup rather than the printer. We help businesses across London, Surrey and Sussex keep everyday equipment running. See our IT support and networks services, or get in touch for a chat.
