YOUR LOCAL IT PARTNER · LONDON SE1020 7 237 9333
HARDWARE · BUSINESS CONTINUITY

Power cuts and surges: how to protect your office IT

A hand holding a surge-protected extension lead against a softly blurred background
Photo: Pexels (free to use)

Most power cuts are short, but even a few seconds without electricity can cause problems. Unsaved work is lost, files being written can be corrupted, and your internet and phones may drop until everything restarts. Surges and spikes can also damage equipment over time. The good news is that a little planning goes a long way.

What can go wrong

  • Desktop computers switch off instantly, losing anything that hasn’t been saved
  • Servers and network storage devices can be damaged or corrupt data if they lose power mid-task
  • Routers and switches go down, taking your internet, Wi-Fi and cloud apps with them
  • Internet-based phones stop working, which matters more now that traditional landlines are being switched off
  • Power surges, for example when supply returns, can damage sensitive electronics

Surge protectors: the simple first step

A surge-protected extension lead is an inexpensive way to guard against spikes in the supply. It won’t keep anything running during a power cut, but it helps protect computers, monitors and chargers from damage. When buying one, check it’s clearly marked as surge protected, rather than assuming every extension lead is. Avoid “daisy-chaining” extension leads into each other, as this can overload them.

What a UPS does

An uninterruptible power supply (UPS) is a unit with a built-in battery. When the mains supply fails, it takes over instantly, so the equipment plugged into it keeps running. A UPS isn’t designed to keep you working for hours. Its job is to bridge short cuts and give you time to save work and shut down safely during longer ones.

There are three common types:

  1. Standby (offline). The simplest and cheapest type, fine for a single computer.
  2. Line-interactive. Also smooths out dips and small changes in voltage, and is a popular choice for small offices and network equipment.
  3. Online (double conversion). Provides the most consistent power and is usually used for servers and critical systems.

What to plug into a UPS

Focus on the equipment that matters most when the power flickers:

  • Your router, broadband equipment and main network switch, so internet and phones stay up
  • Any server or network storage device
  • Desktop computers used for important work

Laptops already have a battery, so they usually don’t need one. Don’t plug laser printers, heaters or kettles into a UPS, as they draw far too much power for it to handle. If your phones are internet-based, our post on the landline switch-off explains why battery backup for your broadband equipment is worth considering.

Looking after it

  • Check the size. Make sure the UPS is rated for everything plugged into it, with some spare capacity.
  • Set up automatic shutdown. Many units can connect to a server or computer and shut it down safely before the battery runs out.
  • Test it now and then. Use the unit’s self-test feature and pay attention to warning lights or beeps.
  • Replace the battery. UPS batteries wear out over time, typically after a few years, and a worn battery may not last when you need it.

Part of a bigger plan

Power protection works best alongside good backups, so a failed device never means lost data. Our guide to the 3-2-1 backup rule is a good place to start. We help businesses across London, Surrey and Sussex choose and set up the right equipment. See our networks and backup and recovery services, or get in touch.

TALK TO OUR TEAM

Want your office IT
ready for a power cut?

Call 020 7 237 9333 or email support@alltechsolutionsit.co.uk.

Request a quote ↗